Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
C-24.2, r. 32 - Regulation respecting safety standards for road vehicles
Section 147
Disposition versions
147. The mirrors shall be securely fixed to the locations intended by the manufacturer, adjustable horizontally and vertically, remain in the desired position and show no sharp edges. None of the rearview mirrors provided for in section 263 of the Code may be missing and they shall be fixed and attached in accordance with that section. The reflecting surface shall be at least 81 cm2 for a flat mirror and 64.5 cm2 for a convex mirror. They shall not be broken, cracked or tarnished. The silvering shall not be unbonded except on the edge of the reflecting surface without exceeding 10% of the total surface.
147. The mirrors shall be securely fixed to the locations intended by the manufacturer, adjustable horizontally and vertically, remain in the desired position and show no sharp edges. The reflecting surface shall be at least 80 cm2 for a flat mirror and 64.5 cm2 for a convex mirror. They shall not be broken, cracked or tarnished. The silvering shall not be unbonded except on the edge of the reflecting surface without exceeding 10% of the total surface.
